壓力變送器的類別千差萬別，按照不同的劃分依據，它們有著不同的類別屬性。對于無線壓力變送器來說，雖然它的應用沒有其他類型那么廣泛，但是也占據著重要的地位。所謂的無線壓力變送器，指的就是一種壓力測量儀器。它的特點主要表現在供電方式為電池支撐、測量精度高、能夠進行無線通訊等等。那么，這類壓力變送器的安裝注意事項及使用特性到底有哪些呢？

         The types of pressure transmitters vary widely,and they have different category attributes according to different divisions.For wireless pressure transmitters,although its application is not as extensive as other types,it also plays an important role.The so-called wireless pressure transmitter refers to a pressure measuring instrument.Its characteristics are mainly reflected in the power supply mode of battery support,high measurement accuracy,wireless communication and so on.So,what are the installation precautions and usage characteristics of such pressure transmitters?

       一、安裝注意事項

       First,the installation notes

       在對無線壓力變送器進行檢查時，根據安裝進程的階段不同，需要注意的事項也有不同。

       When inspecting a wireless pressure transmitter,there are different things to be aware of depending on the stage of the installation process.

       1、安裝前：應對壓力變送器的相關配件進行檢查，一旦出現配置不齊的情況，就容易影響整個加工過程。同時，還需要對它的緊固件進行檢查，查看是否存在松動情況。

       1.Before installation:Check the relevant accessories of the pressure transmitter.Once the configuration is not correct,it will easily affect the whole process.At the same time,it is necessary to check its fasteners to see if there is looseness.

       2、安裝時：在無線壓力變送器的整個安裝過程中，都必須嚴格遵守輕拿輕放的原則。需謹記，應避免過大沖擊力作用于儀表表面或儀表摔在地面現象的產生。

       2.During installation:During the entire installation process of the wireless pressure transmitter,the principle of light handling should be strictly observed.It is important to remember that excessive impact forces should be avoided on the surface of the instrument or that the instrument falls on the ground.

       3、安裝后：即使整個安裝已經結束，也需要對其進行檢查，檢查的內容主要包括接線是否存在接反的問題。

       3.After installation:Even if the entire installation has been completed,it needs to be checked.The contents of the inspection mainly include whether the wiring is reversed.

       二、使用特性及應用領域

       Second,the use characteristics and application areas

       對于這類變送器來說，它的接線安裝方式主要為M20×1.5；在供電方式上，主要使用的是鋰電池，使用壽命一般為1.5年以上。

       For this kind of transmitter,its wiring installation mode is mainly M20×1.5;in the power supply mode,the main use is lithium battery,the service life is generally more than 1.5 years.

       正是因為它具有如此多的性能優勢，因而在許多工業領域都有著它的應用，如食品加工、石油等等。可以說，在工業領域中，它對于壓力測量的自動化有著很大的影響。

       Because of its many performance advantages,it has applications in many industries,such as food processing,oil,and so on.It can be said that in the industrial field,it has a great influence on the automation of pressure measurement.